Toga II 3.0 released

Discussion of anything and everything relating to chess playing software and machines.

Moderators: hgm, Rebel, chrisw

Tennison
Posts: 183
Joined: Sat Nov 26, 2011 2:02 pm

Re: Toga II 3.0 (this version runs!)

Post by Tennison »

Toga II 3.0 is clearly better than Toga Returns 1.1 !

I hope reducing gape for next version. But difficult ... I'm not good programmer ... I'm learning ... :oops:
jd1
Posts: 269
Joined: Wed Oct 24, 2012 2:07 am

Re: Toga II 3.0 (this version runs!)

Post by jd1 »

Tennison wrote:Toga II 3.0 is clearly better than Toga Returns 1.1 !

I hope reducing gape for next version. But difficult ... I'm not good programmer ... I'm learning ... :oops:
Hi Ben,

Thanks for helping Carl. Do feel free however to borrow any code you like from Toga II 3.0 (or even port your changes to it) - I would probably advise you to do so in order to have a stronger Toga :)

As mentioned in the readme.txt and in my sources, I did borrow one idea from Toga Returns also.

All the best,
Jerry
tmokonen
Posts: 1296
Joined: Sun Mar 12, 2006 6:46 pm
Location: Kelowna
Full name: Tony Mokonen

Re: Toga II 3.0 won't run on Win7 x64 system

Post by tmokonen »

Jim Ablett wrote: Your system seems to have an issue with my Intel builds. Maybe it is your antivirus not letting it run correctly.
I have Avast! on my computer, and I can confirm that it flagged the original Intel JA compile of Toga II 3.0 as a virus.
User avatar
Eelco de Groot
Posts: 4561
Joined: Sun Mar 12, 2006 2:40 am
Full name:   

Re: Toga II 3.0 won't run on Win7 x64 system

Post by Eelco de Groot »

If Carl is running his Toga with bitbases the problem is in my opinion very likely to be related to that. Even though I of not know much about possibly more the recent versions of the bitbases, "we" had problems in the past especially on 64 bit systems. I would suggest disabling them if there are problems for it does not bring much elo. If you delete the path from the UCI options it may not solve everything but it can't hurt to try it. Sorry, but I'm not such a big fan of the bitbases for Toga.

Eelco
Debugging is twice as hard as writing the code in the first
place. Therefore, if you write the code as cleverly as possible, you
are, by definition, not smart enough to debug it.
-- Brian W. Kernighan
User avatar
geots
Posts: 4790
Joined: Sat Mar 11, 2006 12:42 am

Re: Toga II 3.0 won't run on Win7 x64 system

Post by geots »

Eelco de Groot wrote:If Carl is running his Toga with bitbases the problem is in my opinion very likely to be related to that. Even though I of not know much about possibly more the recent versions of the bitbases, "we" had problems in the past especially on 64 bit systems. I would suggest disabling them if there are problems for it does not bring much elo. If you delete the path from the UCI options it may not solve everything but it can't hurt to try it. Sorry, but I'm not such a big fan of the bitbases for Toga.

Eelco


+2!

You don't have to worry about deleting the path in any version I looked at. Mine all have the same path: c:/egbb/ You control it, because the path is useless unless you have a folder in C drive containing the egbb. In mine, there is nothing at the end of the path.


gts
Dokterchen
Posts: 133
Joined: Wed Aug 15, 2007 12:18 pm
Location: Munich

Re: Toga II 3.0 released

Post by Dokterchen »

jd1 wrote:Hi everyone!

This is this new release of Toga II 3.0, thanks to Jim Ablett for the compilation.

http://www.computerchess.info/tdbb/phpB ... hp?id=1402

Features:
- scores 64% against previous Toga versions at various time controls, so should be a decent strength improvement.
- Multi-PV fixed

For more details see readme.txt where a full list of changes may be found.

Hope you enjoy using Toga :)

Jerry
Hi all,

the download link does not work anymore. Does anyone can provide Toga II 3.0 again?

Thanks in advance
Torsten
User avatar
Ajedrecista
Posts: 1966
Joined: Wed Jul 13, 2011 9:04 pm
Location: Madrid, Spain.

Re: Toga II 3.0 released.

Post by Ajedrecista »

Hello:
Dokterchen wrote:
jd1 wrote:Hi everyone!

This is this new release of Toga II 3.0, thanks to Jim Ablett for the compilation.

http://www.computerchess.info/tdbb/phpB ... hp?id=1402

Features:
- scores 64% against previous Toga versions at various time controls, so should be a decent strength improvement.
- Multi-PV fixed

For more details see readme.txt where a full list of changes may be found.

Hope you enjoy using Toga :)

Jerry
Hi all,

the download link does not work anymore. Does anyone can provide Toga II 3.0 again?

Thanks in advance
Torsten
The original link works for me with the help of Wayback Machine. Please try the following link:

https://web-beta.archive.org/web/201703 ... hp?id=1402

Enjoy!

Regards from Spain.

Ajedrecista.
Frank Quisinsky
Posts: 6808
Joined: Wed Nov 18, 2009 7:16 pm
Location: Gutweiler, Germany
Full name: Frank Quisinsky

Re: Toga II 3.0 released

Post by Frank Quisinsky »

Hi Torsten,

my last-4-collection ...

Link will be deleted next week ...
http://www.amateurschach.de/download/to ... ection.zip

Best
Frank
Dokterchen
Posts: 133
Joined: Wed Aug 15, 2007 12:18 pm
Location: Munich

Re: Toga II 3.0 released

Post by Dokterchen »

A big thanks to Jesús and Frank for the fast help!

CCC is a really great Community!

Torsten
User avatar
MikeB
Posts: 4889
Joined: Thu Mar 09, 2006 6:34 am
Location: Pen Argyl, Pennsylvania

Toga II 3.0 macOS released

Post by MikeB »

Frank Quisinsky wrote:Hi Torsten,

my last-4-collection ...

Link will be deleted next week ...
http://www.amateurschach.de/download/to ... ection.zip

Best
Frank
Awesome Frank, thank you. - toga III macOS exe and source in the link below

https://www.dropbox.com/s/kvskqiyiyuadw ... S.zip?dl=1

link will not be up forever.