On my two Win7-machines -2 and 4 cores- Scorpio 2.76ja didnt run.
Both x64 compiles and the x32 compile are crashing.'
On my old WinXP machine the same x32 compile runs pretty good.
Someone can please give a helping hand.
Thanx
Scorpio 2.76 ja didnt run on Win7
Moderators: hgm, Rebel, chrisw
-
- Posts: 1600
- Joined: Mon Feb 21, 2011 9:48 am
Re: Scorpio 2.76 ja didnt run on Win7
Try this program (recommended by Microsoft), needs no installation and will tell you if you are missing any dll.mike angel wrote:On my two Win7-machines -2 and 4 cores- Scorpio 2.76ja didnt run.
Both x64 compiles and the x32 compile are crashing.'
On my old WinXP machine the same x32 compile runs pretty good.
Someone can please give a helping hand.
Thanx
http://www.dependencywalker.com/
-
- Posts: 4790
- Joined: Sat Mar 11, 2006 12:42 am
Re: Scorpio 2.76 ja didnt run on Win7
mike angel wrote:On my two Win7-machines -2 and 4 cores- Scorpio 2.76ja didnt run.
Both x64 compiles and the x32 compile are crashing.'
On my old WinXP machine the same x32 compile runs pretty good.
Someone can please give a helping hand.
Thanx
Heading to bed soon, but if you want to run it in a UCI gui adapted from Winboard to UCI and works GREAT and strong- just PM me or get my email address from Ray Banks, Pete Skinner or Don Dailey- either way when I awake I will send you my folders already set up, logo and all- ready to install.
Will be glad to help-
george
-
- Posts: 2872
- Joined: Wed Mar 08, 2006 10:09 pm
- Location: Germany
- Full name: Werner Schüle
Re: Scorpio 2.76 ja didnt run on Win7
Hi Mike,mike angel wrote:On my two Win7-machines -2 and 4 cores- Scorpio 2.76ja didnt run.
Both x64 compiles and the x32 compile are crashing.'
On my old WinXP machine the same x32 compile runs pretty good.
Someone can please give a helping hand.
Thanx
I made my tests only with 1CPU and had no crashes.
So I just tried to analyze with 2CPU and 4CPU - and the engine did not Crash here.
So I think we Need further Infos about the crashes. Do the engines Crash at once, only sometimes e.g. in the endgame, does the engine work inside cmd prompt, which GUI, do you use wb or uci via wb2uci Adapter?
regards
Werner
-
- Posts: 50
- Joined: Sun Jan 30, 2011 1:08 pm
Re: Scorpio 2.76 ja didnt run on Win7
Thx to all who gave me a reply ... will go with it lateron
-
- Posts: 9773
- Joined: Wed Mar 08, 2006 8:44 pm
- Location: Amman,Jordan
Re: Scorpio 2.76 ja didnt run on Win7
Here is my Wb2UCI file....
The engine works perfectly under the Deep Fritz 13 GUI.....
[ENGINE]
Name=Scorpio x64 MP q_2012
Author=François Karr, France
Filename=ScorpioUCI.exe
[OPTIONS]
Program=scorpio-276-64-ja.exe
Ponder=false
Logfile=false
MateScore=9999
OwnBook=true
LevelExtend=Strict
ShowThinkingMove=true
TerminateHard=true
Visible=ShowThinkingMove,Hash
The engine works perfectly under the Deep Fritz 13 GUI.....
[ENGINE]
Name=Scorpio x64 MP q_2012
Author=François Karr, France
Filename=ScorpioUCI.exe
[OPTIONS]
Program=scorpio-276-64-ja.exe
Ponder=false
Logfile=false
MateScore=9999
OwnBook=true
LevelExtend=Strict
ShowThinkingMove=true
TerminateHard=true
Visible=ShowThinkingMove,Hash
_No one can hit as hard as life.But it ain’t about how hard you can hit.It’s about how hard you can get hit and keep moving forward.How much you can take and keep moving forward….
-
- Posts: 50
- Joined: Sun Jan 30, 2011 1:08 pm
Re: Scorpio 2.76 ja didnt run on Win7
.. have checked it out so far - but no success
Gui used - Arena 3.0
Time - 40 / 5 repeating
winboard
crashed at once when starts - Arena logfile stopped after set time
Console says:
"feature done=O
ht .... = 64.0 MB
eht ... = 8.0 MB
pht ... = 0.8 MB
+ Thread 1 started
processors [2]
EgbbProbe not Loaded!
loading_time = 0s" ... end
I used the tool "depends", that tell me, that could not find the following dlls.
api-ms-win-core-com-l1-1-1.dll
api-ms-win-core-winrt-error-l1-1-1.dll
api-ms-win-core-winrt-l1-1-1.dll
api-ms-win-core-winrt-robuffer-l1-1-1.dll
api-ms-win-core-winrt-string-l1-1-1.dll
api-ms-win-share-scaling-l1-1-1.dll
dcomp.dll
after some google-search i found those dll should belong to
MS-Virtual C++ 2010, so I installed MS-Virtual C++ 2012 redistriutable
but after a reboot its all the same .. it crashed and "depends" give the same output
older versions of Scorpio did well as winboard engines
so i dont want to use the wb2uci-adapter cause it costs some performance
what went wrong ?
Gui used - Arena 3.0
Time - 40 / 5 repeating
winboard
crashed at once when starts - Arena logfile stopped after set time
Console says:
"feature done=O
ht .... = 64.0 MB
eht ... = 8.0 MB
pht ... = 0.8 MB
+ Thread 1 started
processors [2]
EgbbProbe not Loaded!
loading_time = 0s" ... end
I used the tool "depends", that tell me, that could not find the following dlls.
api-ms-win-core-com-l1-1-1.dll
api-ms-win-core-winrt-error-l1-1-1.dll
api-ms-win-core-winrt-l1-1-1.dll
api-ms-win-core-winrt-robuffer-l1-1-1.dll
api-ms-win-core-winrt-string-l1-1-1.dll
api-ms-win-share-scaling-l1-1-1.dll
dcomp.dll
after some google-search i found those dll should belong to
MS-Virtual C++ 2010, so I installed MS-Virtual C++ 2012 redistriutable
but after a reboot its all the same .. it crashed and "depends" give the same output
older versions of Scorpio did well as winboard engines
so i dont want to use the wb2uci-adapter cause it costs some performance
what went wrong ?
-
- Posts: 4470
- Joined: Fri Apr 21, 2006 4:19 pm
- Location: IASI - the historical capital of MOLDOVA
- Full name: SilvianR
Re: Really ?
mike angel wrote: so i dont want to use the wb2uci-adapter cause it costs some performance
what went wrong ?
Take a look here :
http://talkchess.com/forum/viewtopic.ph ... 69&t=48225
All was with the last Scorpio, on Fritzy 11 GUI , via Wb2Uci, on WinXP, blah-blah-blah......The engine is superb, the Wb2Uci is super-OK,................the user-I DON'T KNOW !
Scorpio 2.7.6 runs also very well on Win 7 OS !
Regards,
SilvianR
-
- Posts: 4185
- Joined: Tue Mar 14, 2006 11:34 am
- Location: Ethiopia
Re: Really ?
Tell me about it. This is deja vu and the conclusion so far has been scorpio is not idiot-proof. If I say my engine doesn't crush, I have to nurse wounds of butthurt people. Creating a fake scenario to have a second go at me since first time didn't work, second time didn't work etc... Downright pathetic if you ask me. My suggestionsthe user-I DON'T KNOW
->Apply cold water on wounded area
->Leave my engine alone, let her crash all she wants.
->Send crush reports to bopo194@yahoo.com if you have to.
-
- Posts: 2872
- Joined: Wed Mar 08, 2006 10:09 pm
- Location: Germany
- Full name: Werner Schüle
Re: Scorpio 2.76 ja didnt run on Win7
...that´s normal, the engine has not crashed!mike angel wrote:Console says:
"feature done=O
ht .... = 64.0 MB
eht ... = 8.0 MB
pht ... = 0.8 MB
+ Thread 1 started
processors [2]
EgbbProbe not Loaded!
loading_time = 0s"
type:
sd 10
go
and post the result!
Werner