Page 1 of 2
EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz?
Posted: Thu Feb 25, 2016 10:58 pm
by Gusev
I cannot seem to get EXchess 7.88b, Bobcat 7.1 and Scorpio 2.7.7 to run under Deep Fritz 14. (All of them run okay in Arena. Bobcat 6.4b runs under Fritz.) Is there a way to help any of this? This is part of the preparation for FOSCEC Season 3.
Here's what works so far, with 16 threads on an 8-core machine with hypethreading on:
1. Stockfish
2. Sting SF 6.1
3. Gull 3.0.1
4. Firenzina 2.4.3
5. Protector 1.9.0
6. Texel 1.06a40
7. Senpai 1.0
8. Cheng4 v. 0.39
9. Vajolet2 2.1 (8 threads only!)
10. Arasan 18.3
11. Bobcat 6.4b (but not 7.1)
12. Toga II 3.0
13. Crafty 25.0 UCI JA (but not 25.0.1)
14. Octochess R5190 (but Vajolet2 2.1 plays stronger)
Advice, suggestions, and help are most welcome!
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Fri Feb 26, 2016 9:01 am
by Frank Quisinsky
Hi Dimitri,
in my download file to my FCP Rating List (around 300Mb) you can find the configuration from all participant 60 engines. OK, that are the configurations for Shredder Classic GUI (I am not a fan from Fritz GUI) but this one is big help if you have interest to config engines under Fritz GUI.
Hint:
Please use the newer JA compile for Scorpio.
Link can be found in my "Engine sites" selection.
Good luck and have fun!
Best
Frank
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Fri Feb 26, 2016 5:39 pm
by Gusev
Says "Could not load engine Bobcat 7.1"
SzG wrote:Bobcat 7.1 64-bit also works all right for me under Fritz 15.
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Fri Feb 26, 2016 5:41 pm
by Gusev
Thank you! With the WB2UCI adapter, EXchess 7.88b works for me.
SzG wrote:Hi Dmitri,
I have used EXchess 7.88b 64-bit under Fritz 15 successfully, using the WB2UCI adapter. I don't think it is different under Deep Fritz 14.
No experience with neither Bobcat nor Scorpio under Fritz.
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Fri Feb 26, 2016 5:56 pm
by Gusev
Under WB2UCI adapter, Scorpio 2.7.7 JA works, too. Thanks!
Frank Quisinsky wrote:Hi Dimitri,
in my download file to my FCP Rating List (around 300Mb) you can find the configuration from all participant 60 engines. OK, that are the configurations for Shredder Classic GUI (I am not a fan from Fritz GUI) but this one is big help if you have interest to config engines under Fritz GUI.
Hint:
Please use the newer JA compile for Scorpio.
Link can be found in my "Engine sites" selection.
Good luck and have fun!
Best
Frank
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Fri Feb 26, 2016 10:34 pm
by Gusev
This does not help, but now I also see a problem with EXchess and Scorpio running under WB2UCI. How can I increase their number of threads to 16? Each of them only runs 1 thread.
SzG wrote:Gusev wrote:Says "Could not load engine Bobcat 7.1"
SzG wrote:Bobcat 7.1 64-bit also works all right for me under Fritz 15.
This is my Bobcat file under c:\Users\cicus\AppData\Roaming\ChessBase\Engines.UCI\Bobcat 7.1 64-bit.uci
[ENGINE]
Name=Bobcat 7.1 64-bit
Author=Gunnar Harms
Filename=E:\Sakk\UCI-engines\Bobcat\Bobcat_7.1-x64.exe
[OPTIONS]
UCI_Chess960=true
Threads=1
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Sat Feb 27, 2016 8:46 am
by Dr.Wael Deeb
[ENGINE]
Name=EXchess 7.88b Beta x64 MP
Author=Daniel Homan
Filename=EXchessUCI.exe
[OPTIONS]
Program=EXchess_v7.88b_win64.exe
Edit=setboard
Hash=512
InitTime=2
LevelExtend=Progressive
MateScore=10000000
OwnBook=true
Ponder=false
Priority=Normal
Protocol=2
UseUndo=true
TerminateHard=true
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Sat Feb 27, 2016 8:56 am
by velmarin
Gusev wrote:This does not help, but now I also see a problem with EXchess and Scorpio running under WB2UCI. How can I increase their number of threads to 16?
In this download you have documentation on WB2uci.
http://kirr.homeunix.org/chess/engines/ ... 351-ja.zip
This can be a beginning of configuration for EXchess:
Code: Select all
[ENGINE]
Name=EXchess_v7.88b_x64
Author=Daniel C Homan
Filename=EXchess_v7.88b_x64_uci.exe
[OPTIONS]
Program=EXchess_v7.88b_win64.exe
HashCommand=hash %iM
OwnBook=false
Visible=Ponder,Hash,Extras,Logfile,
[EXTRAS]
THREADS=cores|spin|1|1|32
EGTB_PATH=EGTB_PATH|string|c:\Tablebases
EGTB_CACHE_SIZE=EGTB_CACHE_SIZE|spin|8|1|1024
LOG=LOG|check|true|off|on|off
MAX_LOGS=MAX_LOGS|spin|1|1|100
Scorpio should be like, you can look at the sources and see the command that handles cores them,
cores, smp, threads, ect.
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Sat Feb 27, 2016 12:06 pm
by G.B. Harms
Hi Dmitri, I know of a bug in Bobcat 7.1. If you give it more than 1024 MB hash, it will accept the setting but crash at the first move. 1024 MB is the maximum.
Re: EXchess 7.88b, Bobcat 7.1, and Scorpio 2.7.7 under Fritz
Posted: Sat Feb 27, 2016 3:47 pm
by Gregory Owett
Hi,
EXchess 7.88b works with H = 512, but not with 1024 MB!