Page 7 of 8
Re: Polyglot extension tool
Posted: Fri Mar 08, 2019 8:25 pm
by Rebel
Ferdy wrote: ↑Fri Mar 08, 2019 11:00 am
Rebel wrote: ↑Fri Mar 08, 2019 10:17 am
A possible explanation can be that you haven't cleared the scores (the "Clear Analysis" function) and the "g2-g4" comes from a previous session, although I must say that a score of 0.31 remains suspect.
Maybe you can run it again with "Clear Analysis"?
Tried but still same result, I sent a PM with d.bin and new.epd download link.
Thanks.
When I load d.bin in ProDeo I get the same list except for g2-g4, not 0.31 (according to your list) but -0.69, see below. 31+69=100, maybe some sort of sign issue? -0.69 looks pretty correct compared to +0.31 for 1.g4
Code: Select all
Opening Book : books\d.bin
Positions : 381.111
Book Percent Score Depth Learn Move Weight(%) Score Depth Learn
d2d4 36.14% 3 20 0 d2d4 36.00 0.03 20 0
e2e4 36.14% 1 20 0 e2e4 36.00 0.02 20 0
g1f3 12.05% 0 20 0 g1f3 12.00 -0.00 20 0
c2c4 12.05% -9 19 0 c2c4 12.00 -0.09 19 0
b2b3 1.20% -5 19 0 b2b3 1.00 -0.05 19 0
g2g3 1.20% -14 21 0 g2g3 1.00 -0.14 21 0
f2f4 1.20% -21 19 0 f2f4 1.00 -0.21 19 0
b1c3 0.00% -14 19 0 b1c3 0.00 -0.14 19 0
b2b4 0.00% -45 19 0 b2b4 0.00 -0.45 19 0
e2e3 0.00% 0 21 0 e2e3 0.00 0.00 21 0
d2d3 0.00% -21 19 0 d2d3 0.00 -0.21 19 0
a2a3 0.00% -10 18 0 a2a3 0.00 -0.11 18 0
g2g4 0.00% -69 18 0 g2g4 0.00 0.31 18 0
BTW I tried to import a single epd to d.bin by Import Analysis.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 20; acd 22;
But after checking with Poly statistics, Analyzed Positions is 0. So this was not imported. So what is the requirement of the epd format that can be imported?
I will look into that later, have little time at the moment.
Re: Polyglot extension tool
Posted: Fri Mar 08, 2019 9:07 pm
by Rebel
Ferdy wrote: ↑Fri Mar 08, 2019 11:00 amBTW I tried to import a single epd to d.bin by Import Analysis.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 20; acd 22;
But after checking with Poly statistics, Analyzed Positions is 0. So this was not imported. So what is the requirement of the epd format that can be imported?
I checked, it is imported. When I run Poly stats a second time it also shows the correct counter.
Re: Polyglot extension tool
Posted: Sat Mar 09, 2019 3:49 am
by Ferdy
Rebel wrote: ↑Fri Mar 08, 2019 8:25 pm
Ferdy wrote: ↑Fri Mar 08, 2019 11:00 am
Rebel wrote: ↑Fri Mar 08, 2019 10:17 am
A possible explanation can be that you haven't cleared the scores (the "Clear Analysis" function) and the "g2-g4" comes from a previous session, although I must say that a score of 0.31 remains suspect.
Maybe you can run it again with "Clear Analysis"?
Tried but still same result, I sent a PM with d.bin and new.epd download link.
Thanks.
When I load d.bin in ProDeo I get the same list except for g2-g4, not 0.31 (according to your list) but -0.69, see below. 31+69=100, maybe some sort of sign issue? -0.69 looks pretty correct compared to +0.31 for 1.g4
Code: Select all
Opening Book : books\d.bin
Positions : 381.111
Book Percent Score Depth Learn Move Weight(%) Score Depth Learn
d2d4 36.14% 3 20 0 d2d4 36.00 0.03 20 0
e2e4 36.14% 1 20 0 e2e4 36.00 0.02 20 0
g1f3 12.05% 0 20 0 g1f3 12.00 -0.00 20 0
c2c4 12.05% -9 19 0 c2c4 12.00 -0.09 19 0
b2b3 1.20% -5 19 0 b2b3 1.00 -0.05 19 0
g2g3 1.20% -14 21 0 g2g3 1.00 -0.14 21 0
f2f4 1.20% -21 19 0 f2f4 1.00 -0.21 19 0
b1c3 0.00% -14 19 0 b1c3 0.00 -0.14 19 0
b2b4 0.00% -45 19 0 b2b4 0.00 -0.45 19 0
e2e3 0.00% 0 21 0 e2e3 0.00 0.00 21 0
d2d3 0.00% -21 19 0 d2d3 0.00 -0.21 19 0
a2a3 0.00% -10 18 0 a2a3 0.00 -0.11 18 0
g2g4 0.00% -69 18 0 g2g4 0.00 0.31 18 0
Thanks will recheck the formula I used.
Re: Polyglot extension tool
Posted: Sat Mar 09, 2019 4:16 am
by Ferdy
Rebel wrote: ↑Fri Mar 08, 2019 9:07 pm
Ferdy wrote: ↑Fri Mar 08, 2019 11:00 amBTW I tried to import a single epd to d.bin by Import Analysis.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 20; acd 22;
But after checking with Poly statistics, Analyzed Positions is 0. So this was not imported. So what is the requirement of the epd format that can be imported?
I checked, it is imported. When I run Poly stats a second time it also shows the correct counter.
I saved this epd
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 20; acd 22;
to 1.epd and import it. Still it is 0. Second time 0 too. Redownload poly and tried again still 0.
Analyze that 1.epd using poly and it outputs new.epd with the following format.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - id sf10x.exe; bm e2e4; ce 91; acd 20; c1 Threads 1, Hash 128, Time 2000ms;
Import that new.epd to d.bin, check with poly statistics and it is 0, tried again it is still 0.
Perhaps the uploaded poly (the one that I have) is different from the poly that you use.
Re: Polyglot extension tool
Posted: Sat Mar 09, 2019 9:12 am
by Rebel
Ferdy wrote: ↑Sat Mar 09, 2019 4:16 am
Rebel wrote: ↑Fri Mar 08, 2019 9:07 pm
Ferdy wrote: ↑Fri Mar 08, 2019 11:00 amBTW I tried to import a single epd to d.bin by Import Analysis.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 20; acd 22;
But after checking with Poly statistics, Analyzed Positions is 0. So this was not imported. So what is the requirement of the epd format that can be imported?
I checked, it is imported. When I run Poly stats a second time it also shows the correct counter.
I saved this epd
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 20; acd 22;
to 1.epd and import it. Still it is 0. Second time 0 too. Redownload poly and tried again still 0.
Analyze that 1.epd using poly and it outputs new.epd with the following format.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - id sf10x.exe; bm e2e4; ce 91; acd 20; c1 Threads 1, Hash 128, Time 2000ms;
Import that new.epd to d.bin, check with poly statistics and it is 0, tried again it is still 0.
Perhaps the uploaded poly (the one that I have) is different from the poly that you use.
How odd, I did exactly the same as you, re-downloaded Poly 1.2, clear analysis d.bin, made new.epd with the red, ran "Import EPD" and I get the attached output, did you get the same
one change?
Then I loaded d.bin in ProDeo and the change is there.
Code: Select all
Opening Book : books\d.bin
Positions : 381.111
Book Percent Score Depth Learn
d2d4 36.14% 0 0 0
e2e4 36.14% 35 20 0
g1f3 12.05% 0 0 0
c2c4 12.05% 0 0 0
b2b3 1.20% 0 0 0
g2g3 1.20% 0 0 0
f2f4 1.20% 0 0 0
b1c3 0.00% 0 0 0
b2b4 0.00% 0 0 0
e2e3 0.00% 0 0 0
d2d3 0.00% 0 0 0
a2a3 0.00% 0 0 0
g2g4 0.00% 0 0 0
Re: Polyglot extension tool
Posted: Sat Mar 09, 2019 9:58 am
by Ferdy
Rebel wrote: ↑Sat Mar 09, 2019 9:12 am
Ferdy wrote: ↑Sat Mar 09, 2019 4:16 am
Rebel wrote: ↑Fri Mar 08, 2019 9:07 pm
Ferdy wrote: ↑Fri Mar 08, 2019 11:00 amBTW I tried to import a single epd to d.bin by Import Analysis.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 20; acd 22;
But after checking with Poly statistics, Analyzed Positions is 0. So this was not imported. So what is the requirement of the epd format that can be imported?
I checked, it is imported. When I run Poly stats a second time it also shows the correct counter.
I saved this epd
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 20; acd 22;
to 1.epd and import it. Still it is 0. Second time 0 too. Redownload poly and tried again still 0.
Analyze that 1.epd using poly and it outputs new.epd with the following format.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - id sf10x.exe; bm e2e4; ce 91; acd 20; c1 Threads 1, Hash 128, Time 2000ms;
Import that new.epd to d.bin, check with poly statistics and it is 0, tried again it is still 0.
Perhaps the uploaded poly (the one that I have) is different from the poly that you use.
How odd, I did exactly the same as you, re-downloaded Poly 1.2, clear analysis d.bin, made new.epd with the red, ran "Import EPD" and I get the attached output, did you get the same
one change?
Then I loaded d.bin in ProDeo and the change is there.
Code: Select all
Opening Book : books\d.bin
Positions : 381.111
Book Percent Score Depth Learn
d2d4 36.14% 0 0 0
e2e4 36.14% 35 20 0
g1f3 12.05% 0 0 0
c2c4 12.05% 0 0 0
b2b3 1.20% 0 0 0
g2g3 1.20% 0 0 0
f2f4 1.20% 0 0 0
b1c3 0.00% 0 0 0
b2b4 0.00% 0 0 0
e2e3 0.00% 0 0 0
d2d3 0.00% 0 0 0
a2a3 0.00% 0 0 0
g2g4 0.00% 0 0 0
All right I got the epd imported now when using "Import EPD".
Code: Select all
>> position startpos
string received: go wtime 300000 btime 300000 winc 100 binc 100
>> go wtime 300000 btime 300000 winc 100 binc 100
Move Weight(%) Score Depth Learn
d2d4 36.00 0.00 0 0
e2e4 36.00 0.36 20 0
g1f3 12.00 0.00 0 0
c2c4 12.00 0.00 0 0
b2b3 1.00 0.00 0 0
g2g3 1.00 0.00 0 0
f2f4 1.00 0.00 0 0
b1c3 0.00 0.00 0 0
b2b4 0.00 0.00 0 0
e2e3 0.00 0.00 0 0
d2d3 0.00 0.00 0 0
a2a3 0.00 0.00 0 0
g2g4 0.00 0.00 0 0
move e2e4 is selected having the best score!!
<< bestmove e2e4
But I had been using "Import Analysis". You may read back I clearly write it. Anyway this is solved now.
So the use of "Import Analysis" is when the epd is generated and analyzed by poly. In the example single epd we tried, it only worked on "Import EPD".
Re: Polyglot extension tool
Posted: Sat Mar 09, 2019 12:09 pm
by Rebel
Ferdy wrote: ↑Sat Mar 09, 2019 9:58 amBut I had been using "Import Analysis".
You may read back I clearly write it. Anyway this is solved now.
Yep, missed that.
So the use of "Import Analysis" is when the epd is generated and analyzed by poly. In the example single epd we tried, it only worked on "Import EPD".
For a better understanding you might consider to read the web-page again, the 3 functions Prepare, Analyze and Import belong together as a whole, 3 neccessary steps to identify existing book moves in any Polyglot book, then analyze them and last import them. The thing in this process is to remember the
offset in the
Polyglot book and it is stored with a
po tag in the EPD so the import function knows where to store the SF analysis with SEEK_SET. And that's why Import did not work since there is no
po Polyglot offset.
Import EPD doesn't have that problem.
Re: Polyglot extension tool
Posted: Sat Mar 09, 2019 4:12 pm
by Ferdy
Ferdy wrote: ↑Sat Mar 09, 2019 3:49 am
Rebel wrote: ↑Fri Mar 08, 2019 8:25 pm
Ferdy wrote: ↑Fri Mar 08, 2019 11:00 am
Rebel wrote: ↑Fri Mar 08, 2019 10:17 am
A possible explanation can be that you haven't cleared the scores (the "Clear Analysis" function) and the "g2-g4" comes from a previous session, although I must say that a score of 0.31 remains suspect.
Maybe you can run it again with "Clear Analysis"?
Tried but still same result, I sent a PM with d.bin and new.epd download link.
Thanks.
When I load d.bin in ProDeo I get the same list except for g2-g4, not 0.31 (according to your list) but -0.69, see below. 31+69=100, maybe some sort of sign issue? -0.69 looks pretty correct compared to +0.31 for 1.g4
Code: Select all
Opening Book : books\d.bin
Positions : 381.111
Book Percent Score Depth Learn Move Weight(%) Score Depth Learn
d2d4 36.14% 3 20 0 d2d4 36.00 0.03 20 0
e2e4 36.14% 1 20 0 e2e4 36.00 0.02 20 0
g1f3 12.05% 0 20 0 g1f3 12.00 -0.00 20 0
c2c4 12.05% -9 19 0 c2c4 12.00 -0.09 19 0
b2b3 1.20% -5 19 0 b2b3 1.00 -0.05 19 0
g2g3 1.20% -14 21 0 g2g3 1.00 -0.14 21 0
f2f4 1.20% -21 19 0 f2f4 1.00 -0.21 19 0
b1c3 0.00% -14 19 0 b1c3 0.00 -0.14 19 0
b2b4 0.00% -45 19 0 b2b4 0.00 -0.45 19 0
e2e3 0.00% 0 21 0 e2e3 0.00 0.00 21 0
d2d3 0.00% -21 19 0 d2d3 0.00 -0.21 19 0
a2a3 0.00% -10 18 0 a2a3 0.00 -0.11 18 0
g2g4 0.00% -69 18 0 g2g4 0.00 0.31 18 0
Thanks will recheck the formula I used.
I revised my formula, to show cp score from epd.
Example epd's that are imported to d.bin using "Import EPD" in poly.
filename: 1.epd
Code: Select all
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm d2d4; ce 60; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 55; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm g1f3; ce 50; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm c2c4; ce 45; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm b2b3; ce 40; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm g2g3; ce 10; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm f2f4; ce 5; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm b1c3; ce 0; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm b2b4; ce -5; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e3; ce -75; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm d2d3; ce -80; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm a2a3; ce -100; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm g2g4; ce -120; acd 22;
After the import I get this.
Code: Select all
Move Weight(%) Score CP Depth Learn
d2d4 36.14 15360 60 22 0
e2e4 36.14 14080 55 22 0
g1f3 12.05 12800 50 22 0
c2c4 12.05 11520 45 22 0
b2b3 1.20 10240 40 22 0
g2g3 1.20 2560 10 22 0
f2f4 1.20 1280 5 22 0
b1c3 0.00 0 0 22 0
b2b4 0.00 64511 -5 22 0
e2e3 0.00 46591 -75 22 0
d2d3 0.00 45311 -80 22 0
a2a3 0.00 40191 -100 22 0
g2g4 0.00 35071 -120 22 0
The formula for CP is.
Code: Select all
int entryScore = entries[i].score;
int cpScore = entryScore % 256 ? -1 * (1 + (65536 - entryScore)/256) : entryScore / 256;
The limitation of this formula is that it can only handle a maximum cp score of 255 and a minimum score of -256. Beyond those I don't know how to derive the cp from entry.score. So with only this, I will revise the epd with analysis and change the ce values there, if it is more than +255, set it to +255 and if it is less than -256, set it to -256, then import it to bin book.
With prodeo.bin I got.
Code: Select all
Move Weight(%) Score CP Depth Learn
d2d4 51.60 4096 16 20 14
e2e4 41.96 12800 50 20 34
c2c4 4.13 3840 15 20 60
g1f3 2.31 64767 -4 20 0
After e2e4
Code: Select all
Move Weight(%) Score CP Depth Learn
c7c5 38.85 44543 -83 20 251
e7e5 22.38 44031 -85 20 253
e7e6 15.20 49407 -64 20 237
c7c6 8.63 43263 -88 20 6
d7d6 5.71 41471 -95 20 242
d7d5 5.46 34815 -121 20 0
g8f6 3.77 31487 -134 20 0
Re: Polyglot extension tool
Posted: Sat Mar 09, 2019 6:31 pm
by pedrox
This?:
double s = entries
.score >= 30000 ? (double)entries.score / 65536 - 1.0 : (double)entries.score / 65536;
cp = (int)(s*100);
Code: Select all
# Key: 463b96181691fc9c
# Random Weight (0-100): 39.37%
# Move Weight Score CP Depth Learn
# ---- ------ ----- -- ----- -----
# d2d4 51.60% 4096 6 20 14
# e2e4 41.96% 12800 19 20 34
# c2c4 4.13% 3840 5 20 60
# g1f3 2.31% 64767 -1 20 0
0 0 0 0 (Book move)
e2e4
# Key: 823c9b50fd114196
# Random Weight (0-100): 58.08%
# Move Weight Score CP Depth Learn
# ---- ------ ----- -- ----- -----
# c7c5 38.85% 44543 -32 20 251
# e7e5 22.38% 44031 -32 20 253
# e7e6 15.20% 49407 -24 20 237
# c7c6 8.63% 43263 -33 20 6
# d7d6 5.71% 41471 -36 20 242
# d7d5 5.46% 34815 -46 20 0
# g8f6 3.77% 31487 -51 20 0
0 0 0 0 (Book move)
Re: Polyglot extension tool
Posted: Sat Mar 09, 2019 7:14 pm
by Ferdy
pedrox wrote: ↑Sat Mar 09, 2019 6:31 pm
This?:
double s = entries
.score >= 30000 ? (double)entries.score / 65536 - 1.0 : (double)entries.score / 65536;
cp = (int)(s*100);
Code: Select all
# Key: 463b96181691fc9c
# Random Weight (0-100): 39.37%
# Move Weight Score CP Depth Learn
# ---- ------ ----- -- ----- -----
# d2d4 51.60% 4096 6 20 14
# e2e4 41.96% 12800 19 20 34
# c2c4 4.13% 3840 5 20 60
# g1f3 2.31% 64767 -1 20 0
0 0 0 0 (Book move)
e2e4
# Key: 823c9b50fd114196
# Random Weight (0-100): 58.08%
# Move Weight Score CP Depth Learn
# ---- ------ ----- -- ----- -----
# c7c5 38.85% 44543 -32 20 251
# e7e5 22.38% 44031 -32 20 253
# e7e6 15.20% 49407 -24 20 237
# c7c6 8.63% 43263 -33 20 6
# d7d6 5.71% 41471 -36 20 242
# d7d5 5.46% 34815 -46 20 0
# g8f6 3.77% 31487 -51 20 0
0 0 0 0 (Book move)
If I try your formula, it will not display the correct cp from epd analysis.
Here is the epd with ce. Import it to a book using Import EPD.
Code: Select all
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm d2d4; ce 60; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e4; ce 55; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm g1f3; ce 50; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm c2c4; ce 45; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm b2b3; ce 40; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm g2g3; ce 10; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm f2f4; ce 5; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm b1c3; ce 0; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm b2b4; ce -5; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm e2e3; ce -75; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm d2d3; ce -80; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm a2a3; ce -100; acd 22;
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm g2g4; ce -120; acd 22;
Here is the output using your formula.
Code: Select all
Move Weight(%) Score CP Depth Learn
d2d4 36.14 15360 23 22 0
e2e4 36.14 14080 21 22 0
g1f3 12.05 12800 19 22 0
c2c4 12.05 11520 17 22 0
b2b3 1.20 10240 15 22 0
g2g3 1.20 2560 3 22 0
f2f4 1.20 1280 1 22 0
b1c3 0.00 0 0 22 0
b2b4 0.00 64511 -1 22 0
e2e3 0.00 46591 -28 22 0
d2d3 0.00 45311 -30 22 0
a2a3 0.00 40191 -38 22 0
g2g4 0.00 35071 -46 22 0
See the d2d4 move, based from epd, it should be 60 cp.
rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - bm d2d4; ce 60; acd 22;
But in the table, it is 23.
Code: Select all
Move Weight(%) Score CP Depth Learn
d2d4 36.14 15360 23 22 0
With my new formula it will show the same value as in the ce in epd.
The formula that I posted couple of days before as reply to your post was incorrect.