v0.4 Crashes after 3-4 seconds of thinking in Fritz (with Stockfish, Houdini or Komodo as AuxEngine).KillerDucky wrote: ↑Sun Feb 24, 2019 1:23 am v0.21.0-fish-v0.4 released! Just one feature addition and one minor bug fix.
* Add support for AuxEngine to use Syzygy endgame tablebases. Automagic if you configure Lc0 to use Syzygy and AuxEngine supports them.
* Fix a bug with boosting Policy to larger than 100%. Also set maximum AuxEngineBoost to 100%. Internally Lc0 uses a compressed format for Policy so values larger than 100% do not work.
Trying out the Leela Hybrid engine (NN with AB)
Moderators: hgm, Rebel, chrisw
-
- Posts: 2445
- Joined: Sat Sep 03, 2011 7:25 am
- Location: Berlin, Germany
- Full name: Stefan Pohl
Re: Trying out the Leela Hybrid engine (NN with AB)
-
- Posts: 75
- Joined: Thu Jan 31, 2019 4:54 pm
- Full name: Sven Steppenwolf
Re: Trying out the Leela Hybrid engine (NN with AB)
I can confirm this (for the blas flavour) under Fritz 16 with SF as additional engine, it also crashes.
-
- Posts: 1439
- Joined: Sat Oct 27, 2018 12:58 am
- Location: Germany
- Full name: N.N.
Re: Trying out the Leela Hybrid engine (NN with AB)
On my Laptop i3 2x2,4 GHz CPU-Version under Fritz 15 with Shashchess works.
-
- Posts: 47
- Joined: Fri Feb 15, 2019 11:41 pm
- Full name: Brent M
Re: Trying out the Leela Hybrid engine (NN with AB)
Mine works fine after updating my drivers from NVIDIA. I also downloaded their latest CUDA.
LeelaFish 0.4
GeForce RTX 2070
cudnn-fp16
Fritz 16
Stockfish 10 x64 popcnt
LeelaFish 0.4
GeForce RTX 2070
cudnn-fp16
Fritz 16
Stockfish 10 x64 popcnt
-
- Posts: 1766
- Joined: Wed Jun 03, 2009 12:14 am
Re: Trying out the Leela Hybrid engine (NN with AB)
haven't tried w/ 32930 but i get remarkable results w/ these settings & T40:Laskos wrote: ↑Fri Feb 22, 2019 6:53 pm I think it's important to keep in mind that we assume Auxiliary engine must just help Lc0 tactically, and ideally it's much weaker than both Lc0 and its opponent. Many might be be tempted to use Auxiliary engine the level of SF, while their Lc0 is weaker than SF in some conditions. Even on my powerful GPU set-up this might occur. So, I took as Auxiliary engine Arasan 19.01 on 1 thread, an AB engine some 800-900 Elo points weaker than both Lc0 t30 and SF on 4 cores. It still helps a lot, solving many more positions on trimmed WAC tactical test suite and not harming almost at all the positional abilities of Lc0 (on my positional test-suite). But I changed some settings to get such a result with a weak Auxiliary engine:
AuxEngineBoost=20.00
AuxEngineDepth=10
AuxEngineThreshold=10
AuxEngineFollowPvDepth=3
In games, it increases Lc0 t30 strength against SF10 (4 cores) by some 35-40 Elo points, and the weak Arasan 19.01 on 1 thread helps almost as much as SF10 as an auxiliary engine (SF10 adds some 40-50 Elo points). The games were at bullet TC.
With SF10 as an auxiliary engine, many settings will work, as it is close in strength or stronger than Lc0, but with a weak auxiliary AB engine, finding correct settings is trickier. It has to know when it can intervene, and this is usually the case of gross tactical mistakes of Lc0. Still, endgames are bad.
Engine Score Lc
1: Lc0 T40 37.0/100 ··················································
2: Leelafish SFDev+T40KL 2 threads 32.0/50 =111=1=1==========1=========1111=1=====1===1=====1
3: Leelafish SFDev+T40KL 31.0/50 1===11=1==11=1=============1=111=1==============01
100 games played / Tournament finished
Name of the tournament: T40 vs LFKai 1 v 2 threads
Site/ Country: PC, United States
Level: Blitz 1/1
Hardware: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz with 15.9 GB Memory
using sfdev on 1/2 cores. imo the author's done a remarkable job in such short time; it plays like leela without the idiosyncracies. i suspect matefinder or perhaps sting would produce similar results. yet to try those, or a match vs SFDEV on multiple cores tho.
currently id41109+sfdev is +1 =3 -0 on t30 in a 4+4 match.
-
- Posts: 10948
- Joined: Wed Jul 26, 2006 10:21 pm
- Full name: Kai Laskos
Re: Trying out the Leela Hybrid engine (NN with AB)
Wow, good results indeed with T40. I am also getting apparently good results with T30 at 30'' + 0.5'' using Aux Engine Houdini 6.03 Tactical on 2 threads (similar settings of LcFish to those I posted) in a long round-robin, simulating something like CCCC or TCEC in some late rounds:yanquis1972 wrote: ↑Sun Feb 24, 2019 8:13 pmhaven't tried w/ 32930 but i get remarkable results w/ these settings & T40:Laskos wrote: ↑Fri Feb 22, 2019 6:53 pm I think it's important to keep in mind that we assume Auxiliary engine must just help Lc0 tactically, and ideally it's much weaker than both Lc0 and its opponent. Many might be be tempted to use Auxiliary engine the level of SF, while their Lc0 is weaker than SF in some conditions. Even on my powerful GPU set-up this might occur. So, I took as Auxiliary engine Arasan 19.01 on 1 thread, an AB engine some 800-900 Elo points weaker than both Lc0 t30 and SF on 4 cores. It still helps a lot, solving many more positions on trimmed WAC tactical test suite and not harming almost at all the positional abilities of Lc0 (on my positional test-suite). But I changed some settings to get such a result with a weak Auxiliary engine:
AuxEngineBoost=20.00
AuxEngineDepth=10
AuxEngineThreshold=10
AuxEngineFollowPvDepth=3
In games, it increases Lc0 t30 strength against SF10 (4 cores) by some 35-40 Elo points, and the weak Arasan 19.01 on 1 thread helps almost as much as SF10 as an auxiliary engine (SF10 adds some 40-50 Elo points). The games were at bullet TC.
With SF10 as an auxiliary engine, many settings will work, as it is close in strength or stronger than Lc0, but with a weak auxiliary AB engine, finding correct settings is trickier. It has to know when it can intervene, and this is usually the case of gross tactical mistakes of Lc0. Still, endgames are bad.
Engine Score Lc
1: Lc0 T40 37.0/100 ··················································
2: Leelafish SFDev+T40KL 2 threads 32.0/50 =111=1=1==========1=========1111=1=====1===1=====1
3: Leelafish SFDev+T40KL 31.0/50 1===11=1==11=1=============1=111=1==============01
100 games played / Tournament finished
Name of the tournament: T40 vs LFKai 1 v 2 threads
Site/ Country: PC, United States
Level: Blitz 1/1
Hardware: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz with 15.9 GB Memory
using sfdev on 1/2 cores. imo the author's done a remarkable job in such short time; it plays like leela without the idiosyncracies. i suspect matefinder or perhaps sting would produce similar results. yet to try those, or a match vs SFDEV on multiple cores tho.
currently id41109+sfdev is +1 =3 -0 on t30 in a 4+4 match.
Code: Select all
Rank Name Elo +/- Games Score Draws
1 lc0_Fish_32930 200 40 200 76.0% 39.0%
2 lc0_32930 137 35 200 68.8% 47.5%
3 SF_dev 131 39 200 68.0% 39.0%
4 Kom_123 -45 39 200 43.5% 36.0%
5 Ethereal_1125 -158 42 200 28.7% 31.5%
6 Andscacs_095 -301 49 200 15.0% 25.0%
Finished match
I am curious too about T40 nets, will check them someday. They seem to scale better than T30, so maybe a bit longer TC than I used with T30 is necessary.
-
- Posts: 47
- Joined: Fri Feb 15, 2019 11:41 pm
- Full name: Brent M
Re: Trying out the Leela Hybrid engine (NN with AB)
How are you able to force Houdini tactical mode? I mean, you have to feed LeelaFish commands in the command line. Right? Or does setting Houdini to tactical mode, via the gui, work too? Thanks for your help
Wow, good results using ... Aux Engine Houdini 6.03 Tactical on 2 threads ...
-
- Posts: 3707
- Joined: Thu Mar 16, 2006 7:10 pm
Re: Trying out the Leela Hybrid engine (NN with AB)
Decided to give this engine a try ... but it seems to crash on the Fritz GUI when I start the engine in analysis? I tried the default setting first but as soon as the engine starts I get a DOS prompt and the engine stalls ... sometimes it gives an exception fault. I think there should be a read me file where it explains a lot of the stuff there as most of it is hard to decipher what it changes. An accurate description of each parameter would allow people to experiment with different parameters and maybe stumble on something better than default.
With regards to the engine path ... should it be between " " ?
I attach the Logfile
With regards to the engine path ... should it be between " " ?
I attach the Logfile
-
- Posts: 782
- Joined: Tue Dec 01, 2009 11:10 am
Re: Trying out the Leela Hybrid engine (NN with AB)
hi there
I need to get it working by using the lc0.config file
"unknown command line flag
--aux-engine-path=C:\Users\Skylake\Documents\InfinityChess\Data\Engines\BrainFish_190222/BrainFish_190222_x64_modern.exe"
in Fritz gui it works witzh this parameters:
regards, C.K.
I need to get it working by using the lc0.config file
this is my configile, path of engine is correct, but lc0 gives error message--aux-engine-path=C:\Users\Skylake\Documents\InfinityChess\Data\Engines\BrainFish_190222/BrainFish_190222_x64_modern.exe
--aux-engine-options=Hash=1024;Threads=2
"unknown command line flag
--aux-engine-path=C:\Users\Skylake\Documents\InfinityChess\Data\Engines\BrainFish_190222/BrainFish_190222_x64_modern.exe"
in Fritz gui it works witzh this parameters:
any Idea whats wron in my lc0.config file?[OPTIONS]
Threads=8
Slowmover=0.800000
Backend=1
AuxEnginePath=C:\Users\Skylake\Documents\InfinityChess\Data\Engines\BrainFish_190222/BrainFish_190222_x64_modern.exe
AuxEngineOptions=Hash=1024;Threads=2
regards, C.K.
-
- Posts: 1600
- Joined: Mon Feb 21, 2011 9:48 am
Re: Trying out the Leela Hybrid engine (NN with AB)
AuxEnginePath=C:\Users\Skylake\Documents\InfinityChess\Data\Engines\BrainFish_190222/ (ERROR)BrainFish_190222_x64_modern.exe
Correct: AuxEnginePath=C:\Users\Skylake\Documents\InfinityChess\Data\Engines\BrainFish_190222\BrainFish_190222_x64_modern.exe
Better to put the auxiliary engine in the leelafish directory, directly.
and in the configuration box only the name of the engine and it works perfect.
Correct: AuxEnginePath=C:\Users\Skylake\Documents\InfinityChess\Data\Engines\BrainFish_190222\BrainFish_190222_x64_modern.exe
Better to put the auxiliary engine in the leelafish directory, directly.
and in the configuration box only the name of the engine and it works perfect.