Page 1 of 2
FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Wed Aug 28, 2019 3:14 pm
by fastgm
FGRL Rating list -
60 seconds + 0.6 seconds
Komodo 13.1 (
+17 to Komodo 13.01)
Topple 0.7.2
RuyDos 1.1.10
Cheese 2.1
http://www.fastgm.de
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Wed Aug 28, 2019 6:37 pm
by Guenther
fastgm wrote: ↑Wed Aug 28, 2019 3:14 pm
FGRL Rating list -
60 seconds + 0.6 seconds
Komodo 13.1 (
+17 to Komodo 13.01)
Topple 0.7.2
RuyDos 1.1.10
Cheese 2.1
http://www.fastgm.de
Andreas, do you have any plans for adding Minic?
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Thu Aug 29, 2019 7:57 am
by xr_a_y
Guenther wrote: ↑Wed Aug 28, 2019 6:37 pm
fastgm wrote: ↑Wed Aug 28, 2019 3:14 pm
FGRL Rating list -
60 seconds + 0.6 seconds
Komodo 13.1 (
+17 to Komodo 13.01)
Topple 0.7.2
RuyDos 1.1.10
Cheese 2.1
http://www.fastgm.de
Andreas, do you have any plans for adding Minic?
That would be great. I'll publish a 0.89 release this morning with again +30 so near 2800.
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Thu Aug 29, 2019 9:09 am
by fastgm
Guenther wrote: ↑Wed Aug 28, 2019 6:37 pm
Andreas, do you have any plans for adding Minic?
The LittleBlitzer GUI only supports UCI engines.
Maybe I can integrate Minic via the WB2UCI adapter. I'll give it a try.
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Thu Aug 29, 2019 9:26 am
by xr_a_y
fastgm wrote: ↑Thu Aug 29, 2019 9:09 am
Guenther wrote: ↑Wed Aug 28, 2019 6:37 pm
Andreas, do you have any plans for adding Minic?
The LittleBlitzer GUI only supports UCI engines.
Maybe I can integrate Minic via the WB2UCI adapter. I'll give it a try.
Minic can use UCI too, I'll generate UCI release next time.
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Sun Sep 15, 2019 9:01 pm
by xr_a_y
xr_a_y wrote: ↑Thu Aug 29, 2019 9:26 am
fastgm wrote: ↑Thu Aug 29, 2019 9:09 am
Guenther wrote: ↑Wed Aug 28, 2019 6:37 pm
Andreas, do you have any plans for adding Minic?
The LittleBlitzer GUI only supports UCI engines.
Maybe I can integrate Minic via the WB2UCI adapter. I'll give it a try.
Minic can use UCI too, I'll generate UCI release next time.
Done
release 0.99
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Mon Sep 16, 2019 9:02 pm
by fastgm
Minic can use UCI too, I'll generate UCI release next time.
Done
release 0.99
Hi Vivien!
Unfortunately, the new version 0.99 does not work with the LittleBlitzer GUI.
Here is the
LittleBlitzer GUI log:
Code: Select all
-->((null)) uci
<--((null))
<--((null)) D:\Schach\LittleBlitzer-2.74>"D:\Schach\LittleBlitzer-2.74\minic_0.99_mingw_x64_x86-64" -uci
<--((null)) # This is Minic version 0.99
<--((null)) # Warn 2019-09-16 20:19:59-740: Cannot open minic.json
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, debugMode
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, debugMode
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, debugFile
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, debugFile
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, book
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, book
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, bookFile
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, bookFile
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, ttSizeMb
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, ttSizeMb
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, threads
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, threads
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, mateFinder
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, mateFinder
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, fullXboardOutput
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, fullXboardOutput
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, level
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, level
<--((null)) # Warn 2019-09-16 20:19:59-740: ARG key not given, syzygyPath
<--((null)) # Warn 2019-09-16 20:19:59-740: JSON key not given, syzygyPath
<--((null)) # Info 2019-09-16 20:19:59-740: Init hash
<--((null)) # Info 2019-09-16 20:19:59-740: Init TT
<--((null)) # Info 2019-09-16 20:19:59-740: Bucket size 48
<--((null)) # Info 2019-09-16 20:19:59-802: Size of TT 96Mb
<--((null)) # Info 2019-09-16 20:19:59-802: Init lmr
<--((null)) # Info 2019-09-16 20:19:59-802: Init mvv-lva
<--((null)) # Info 2019-09-16 20:19:59-802: Init mask
<--((null)) # Info 2019-09-16 20:19:59-802: KPK init
<--((null)) # Info 2019-09-16 20:19:59-818: Material hash total : 944784
<--((null)) # Info 2019-09-16 20:19:59-818: Using 1 threads
<--((null)) # Warn 2019-09-16 20:19:59-818: book file book.bin not found, cannot load book
<--((null)) # Info 2019-09-16 20:19:59-818: Init tb from path
<--((null)) # Info 2019-09-16 20:19:59-818: MAX_TB_MEN: 0
<--((null)) info string Info 2019-09-16 20:19:59-818: Init uci
<--((null)) info string Info 2019-09-16 20:19:59-818: Init COM
<--((null)) info string Info 2019-09-16 20:19:59-818: Reading fen rnbqkbnr/pppppppp/8/8/8/8/PPPPPPPP/RNBQKBNR w KQkq - 0 1
<--((null)) info string Info 2019-09-16 20:19:59-818: No en passant square given
<--((null)) info string Info 2019-09-16 20:19:59-865: Init timeman
<--((null)) info string Info 2019-09-16 20:19:59-865: Received command : uci
<--((null)) info string Info 2019-09-16 20:19:59-865: uci received command uci
<--((null)) id name Minic 0.99
<--(Minic 0.99) id author Vivien Clauzon
<--(Minic 0.99) option name qfutilityMargin0 type spin default 90 min 0 max 1500
<--(Minic 0.99) option name qfutilityMargin1 type spin default 90 min 0 max 1500
<--(Minic 0.99) option name staticNullMoveMaxDepth0 type spin default 6 min 0 max 30
<--(Minic 0.99) option name staticNullMoveMaxDepth1 type spin default 6 min 0 max 30
<--(Minic 0.99) option name staticNullMoveDepthCoeff0 type spin default 80 min 0 max 1500
<--(Minic 0.99) option name staticNullMoveDepthCoeff1 type spin default 80 min 0 max 1500
<--(Minic 0.99) option name staticNullMoveDepthInit0 type spin default 0 min 0 max 1500
<--(Minic 0.99) option name staticNullMoveDepthInit1 type spin default 0 min 0 max 1500
<--(Minic 0.99) option name razoringMarginDepthCoeff0 type spin default 0 min 0 max 1500
<--(Minic 0.99) option name razoringMarginDepthCoeff1 type spin default 0 min 0 max 1500
<--(Minic 0.99) option name razoringMarginDepthInit0 type spin default 200 min 0 max 1500
<--(Minic 0.99) option name razoringMarginDepthInit1 type spin default 200 min 0 max 1500
<--(Minic 0.99) option name razoringMaxDepth0 type spin default 3 min 0 max 30
<--(Minic 0.99) option name razoringMaxDepth1 type spin default 3 min 0 max 30
<--(Minic 0.99) option name nullMoveMinDepth type spin default 2 min 0 max 30
<--(Minic 0.99) option name historyPruningMaxDepth type spin default 3 min 0 max 30
<--(Minic 0.99) option name historyPruningThresholdInit type spin default 0 min 0 max 1500
<--(Minic 0.99) option name historyPruningThresholdDepth type spin default 0 min 0 max 1500
<--(Minic 0.99) option name futilityMaxDepth0 type spin default 10 min 0 max 30
<--(Minic 0.99) option name futilityMaxDepth1 type spin default 10 min 0 max 30
<--(Minic 0.99) option name futilityDepthCoeff0 type spin default 160 min 0 max 1500
<--(Minic 0.99) option name futilityDepthCoeff1 type spin default 160 min 0 max 1500
<--(Minic 0.99) option name futilityDepthInit0 type spin default 0 min 0 max 1500
<--(Minic 0.99) option name futilityDepthInit1 type spin default 0 min 0 max 1500
<--(Minic 0.99) option name iidMinDepth type spin default 5 min 0 max 30
<--(Minic 0.99) option name iidMinDepth2 type spin default 8 min 0 max 30
<--(Minic 0.99) option name probCutMinDepth type spin default 5 min 0 max 30
<--(Minic 0.99) option name probCutMaxMoves type spin default 5 min 0 max 30
<--(Minic 0.99) option name probCutMargin type spin default 80 min 0 max 1500
<--(Minic 0.99) option name lmrMinDepth type spin default 3 min 0 max 30
<--(Minic 0.99) option name singularExtensionDepth type spin default 8 min 0 max 30
<--(Minic 0.99) uciok
-->(Minic 0.99) setoption name Hash value 1
-->(Minic 0.99) setoption name Ponder value false
-->(Minic 0.99) setoption name OwnBook value false
-->(Minic 0.99) isready
<--(Minic 0.99) info string Info 2019-09-16 20:19:59-927: Received command : setoption name Hash value 1
<--(Minic 0.99) info string Info 2019-09-16 20:19:59-927: uci received command setoption
<--(Minic 0.99) info string Fatal 2019-09-16 20:19:59-927: Key not found Hash
<--(Minic 0.99) @todo:: backtrace
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Tue Sep 17, 2019 6:50 am
by xr_a_y
The log is saying you are trying to use "Hash" option as a UCI option.
This is not available yet. Setting Hash size option can be done from command line or from the minic.json configuration file.
Will do the job. I also see that you try to set "Hash"=1 that is quite small. Maybe it was just a test ?
Regards
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Tue Sep 17, 2019 8:17 am
by fastgm
The LittleBlitzer GUI makes a test before launching a tournament, starting each engine with this three uci options:
setoption name Hash value 1
setoption name Ponder value false
setoption name OwnBook value false
Thereafter, the UCI options set for the tournament will be applied.
Here is an LittleBlitzer log of two other engines:
Code: Select all
-->((null)) uci
<--((null)) Xiphos 0.5.6 SSE by Milos Tatarevic
<--((null)) threads=1
<--((null)) hash=128MB
<--((null)) id name Xiphos 0.5.6 SSE
<--(Xiphos 0.5.6 SSE) id author Milos Tatarevic
<--(Xiphos 0.5.6 SSE) option name Hash type spin default 128 min 1 max 32768
<--(Xiphos 0.5.6 SSE) option name Threads type spin default 1 min 1 max 128
<--(Xiphos 0.5.6 SSE) option name Ponder type check default false
<--(Xiphos 0.5.6 SSE) option name SyzygyPath type string default <empty>
<--(Xiphos 0.5.6 SSE) option name SyzygyProbeDepth type spin default 1 min 1 max 100
<--(Xiphos 0.5.6 SSE) uciok
-->(Xiphos 0.5.6 SSE) setoption name Hash value 1
-->(Xiphos 0.5.6 SSE) setoption name Ponder value false
-->(Xiphos 0.5.6 SSE) setoption name OwnBook value false
-->(Xiphos 0.5.6 SSE) isready
<--(Xiphos 0.5.6 SSE) hash=1MB
<--(Xiphos 0.5.6 SSE) ponder=0
<--(Xiphos 0.5.6 SSE) readyok
-->(Xiphos 0.5.6 SSE) quit
-->((null)) uci
<--((null)) Andscacs 0.95 by Daniel Jose
<--((null)) id name Andscacs 0.95
<--(Andscacs 0.95) id author Daniel Jose
<--(Andscacs 0.95) option name Ponder type check default false
<--(Andscacs 0.95) option name Hash type spin default 128 min 1 max 65536
<--(Andscacs 0.95) option name Clear Hash type button
<--(Andscacs 0.95) option name NullMove type check default true
<--(Andscacs 0.95) option name MultiPV type spin default 1 min 1 max 100
<--(Andscacs 0.95) option name Threads type spin default 1 min 1 max 512
<--(Andscacs 0.95) option name AlwaysFullPv type check default false
<--(Andscacs 0.95) option name Contempt type spin default 0 min -100 max 100
<--(Andscacs 0.95) option name NeverClearHash type check default false
<--(Andscacs 0.95) option name HashFile type string default hash.hsh
<--(Andscacs 0.95) option name SaveHashtoFile type button
<--(Andscacs 0.95) option name LoadHashfromFile type button
<--(Andscacs 0.95) uciok
-->(Andscacs 0.95) setoption name Hash value 1
-->(Andscacs 0.95) setoption name Ponder value false
-->(Andscacs 0.95) setoption name OwnBook value false
-->(Andscacs 0.95) isready
<--(Andscacs 0.95) readyok
-->(Andscacs 0.95) quit
Re: FGRL 60 sec + 0.6 sec Rating list - Komodo 13.1, Topple 0.7.2, RuyDos 1.1.10, Cheese 2.1
Posted: Tue Sep 17, 2019 8:45 am
by xr_a_y
Ok so this GUI thinks "Hash" option is available in all engines. I think this is not stated in the protocol spec. But anyway, I will make that available in next release (or at least not an error).
Thanks for testing.