Flag Of The Skull

Discussion of computer chess matches and engine tournaments.

Moderators: hgm, Harvey Williamson, bob

Forum rules
This textbox is used to restore diagrams posted with the [d] tag before the upgrade.
User avatar
Graham Banks
Posts: 32784
Joined: Sun Feb 26, 2006 9:52 am
Location: Auckland, NZ

Re: Flag Of The Skull

Post by Graham Banks » Wed Aug 14, 2019 11:19 pm

fabianVDW wrote:
Wed Aug 14, 2019 9:14 pm
Hi Graham,

I am working on my connection to your TLCV server.

Do you know by chance which protocol do I need to connect there. I have many options such as TCP, UDP.... etc.
Not sure offhand, but I'm sure that somebody will answer.
My email addresses:
gbanksnz at gmail.com
gbanksnz at yahoo.co.nz

Daniel Anulliero
Posts: 682
Joined: Fri Jan 04, 2013 3:55 pm
Location: Nice

Re: Flag Of The Skull

Post by Daniel Anulliero » Thu Aug 15, 2019 8:27 am

fabianVDW wrote:
Wed Aug 14, 2019 9:14 pm
Hi Graham,

I am working on my connection to your TLCV server.

Do you know by chance which protocol do I need to connect there. I have many options such as TCP, UDP.... etc.
May be you have a firewall problem?
Try to open (or allow) the TLCV's port manually?
(I use TCP here)

mar
Posts: 1981
Joined: Fri Nov 26, 2010 1:00 pm
Location: Czech Republic
Full name: Martin Sedlak

Re: Flag Of The Skull

Post by mar » Thu Aug 15, 2019 9:52 am

fabianVDW wrote:
Wed Aug 14, 2019 9:14 pm
Hi Graham,

I am working on my connection to your TLCV server.

Do you know by chance which protocol do I need to connect there. I have many options such as TCP, UDP.... etc.
TLCV/TLCS use UDP

You need to allow incoming UDP at ports 160xx (firewall/router), which is what Graham uses to broadcast IIRC
Martin Sedlak

fabianVDW
Posts: 45
Joined: Fri Mar 15, 2019 7:46 pm
Location: Germany
Full name: Fabian von der Warth

Re: Flag Of The Skull

Post by fabianVDW » Thu Aug 15, 2019 5:40 pm

mar wrote:
Thu Aug 15, 2019 9:52 am
fabianVDW wrote:
Wed Aug 14, 2019 9:14 pm
Hi Graham,

I am working on my connection to your TLCV server.

Do you know by chance which protocol do I need to connect there. I have many options such as TCP, UDP.... etc.
TLCV/TLCS use UDP

You need to allow incoming UDP at ports 160xx (firewall/router), which is what Graham uses to broadcast IIRC
On my router I opened ports 16000-16005 with UDP for my PC. Still does not work. Can't even ping Grahams server.
Author of FabChess: https://github.com/fabianvdW/FabChess
A UCI compliant chess engine written in Rust.
fabianvonderwarth@gmail.com

Daniel Anulliero
Posts: 682
Joined: Fri Jan 04, 2013 3:55 pm
Location: Nice

Re: Flag Of The Skull

Post by Daniel Anulliero » Thu Aug 15, 2019 6:07 pm

fabianVDW wrote:
Thu Aug 15, 2019 5:40 pm
mar wrote:
Thu Aug 15, 2019 9:52 am
fabianVDW wrote:
Wed Aug 14, 2019 9:14 pm
Hi Graham,

I am working on my connection to your TLCV server.

Do you know by chance which protocol do I need to connect there. I have many options such as TCP, UDP.... etc.
TLCV/TLCS use UDP

You need to allow incoming UDP at ports 160xx (firewall/router), which is what Graham uses to broadcast IIRC
On my router I opened ports 16000-16005 with UDP for my PC. Still does not work. Can't even ping Grahams server.
Try to configure your windows firewall too

fabianVDW
Posts: 45
Joined: Fri Mar 15, 2019 7:46 pm
Location: Germany
Full name: Fabian von der Warth

Re: Flag Of The Skull

Post by fabianVDW » Thu Aug 15, 2019 6:28 pm

I have added rules for Tom's Viewer that should allow it to connect. Even with the Firewall turned off there is no connection.
Author of FabChess: https://github.com/fabianvdW/FabChess
A UCI compliant chess engine written in Rust.
fabianvonderwarth@gmail.com

mar
Posts: 1981
Joined: Fri Nov 26, 2010 1:00 pm
Location: Czech Republic
Full name: Martin Sedlak

Re: Flag Of The Skull

Post by mar » Thu Aug 15, 2019 7:52 pm

Hmm, maybe it could be related to DS-Lite?
http://www.talkchess.com/forum3/viewtop ... 3&start=10
Similar issue here:
https://github.com/kmar/livius/issues/5

If that's the case, you may need to contact your ISP
Martin Sedlak

fabianVDW
Posts: 45
Joined: Fri Mar 15, 2019 7:46 pm
Location: Germany
Full name: Fabian von der Warth

Re: Flag Of The Skull

Post by fabianVDW » Thu Aug 15, 2019 8:20 pm

mar wrote:
Thu Aug 15, 2019 7:52 pm
Hmm, maybe it could be related to DS-Lite?
http://www.talkchess.com/forum3/viewtop ... 3&start=10
Similar issue here:
https://github.com/kmar/livius/issues/5

If that's the case, you may need to contact your ISP
Yes I think DS-Lite might be the issue.
Author of FabChess: https://github.com/fabianvdW/FabChess
A UCI compliant chess engine written in Rust.
fabianvonderwarth@gmail.com

User avatar
Graham Banks
Posts: 32784
Joined: Sun Feb 26, 2006 9:52 am
Location: Auckland, NZ

Re: Flag Of The Skull

Post by Graham Banks » Fri Aug 16, 2019 10:35 pm

FLAG OF THE SKULL

Intel i5 Quad
ChessGUI
256mb hash each where possible
3-4-5 piece tablebases
Ponder off
PlaychessInfinity14-18.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 30 rounds
All engines 1CPU (64-bit where possible)


Standings after Round 20

14.5 - KnightX 1.95 64-bit
12.0 - Barbarossa 0.6.0 64-bit
12.0 - Myrddin 0.87 64-bit
11.5 - RomiChess P3n 64-bit
11.0 - FabChess 1.9.1 64-bit
10.5 - Ares GB 64-bit
10.5 - Isa 2.0.83 64-bit
10.0 - Axolotl 1.8 64-bit
9.5 - Galjoen 0.39.2 64-bit
9.5 - KnightDreamer 3.3
9.5 - Plisk 0.2.7d 64-bit
9.0 - Zevra 2.1.1 r216 64-bit
9.0 - Googleplex Starthinker 1.4 64-bit
8.5 - CmcChess 2.6 64-bit
7.0 - Tunguska 1.1 64-bit
6.0 - Thor's Hammer 2.28 32-bit


Standings will be posted and games made available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=11350

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can access the broadcast through Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
My email addresses:
gbanksnz at gmail.com
gbanksnz at yahoo.co.nz

User avatar
Graham Banks
Posts: 32784
Joined: Sun Feb 26, 2006 9:52 am
Location: Auckland, NZ

Re: Flag Of The Skull

Post by Graham Banks » Sun Aug 18, 2019 10:42 pm

FLAG OF THE SKULL

Intel i5 Quad
ChessGUI
256mb hash each where possible
3-4-5 piece tablebases
Ponder off
PlaychessInfinity14-18.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 30 rounds
All engines 1CPU (64-bit where possible)


Standings after Round 24

16.5 - KnightX 1.95 64-bit
15.0 - Myrddin 0.87 64-bit
14.5 - RomiChess P3n 64-bit
13.5 - FabChess 1.9.1 64-bit
13.0 - Barbarossa 0.6.0 64-bit
12.5 - Isa 2.0.83 64-bit
12.0 - Ares GB 64-bit
12.0 - CmcChess 2.6 64-bit
12.0 - Plisk 0.2.7d 64-bit
11.5 - Galjoen 0.39.2 64-bit
11.5 - Axolotl 1.8 64-bit
11.0 - KnightDreamer 3.3
10.5 - Tunguska 1.1 64-bit
10.0 - Zevra 2.1.1 r216 64-bit
9.5 - Googleplex Starthinker 1.4 64-bit
7.0 - Thor's Hammer 2.28 32-bit


Standings will be posted and games made available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=11350

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16001

Linux users can access the broadcast through Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
My email addresses:
gbanksnz at gmail.com
gbanksnz at yahoo.co.nz

Post Reply