Topple Of The Monolith

Discussion of computer chess matches and engine tournaments.

Moderators: hgm, Rebel, chrisw

User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Participants

Drofa 3.1.0 64-bit
Pirarucu 3.3.5 64-bit
Counter 3.8 64-bit
Topple 0.8.0 64-bit
Rodent IV 0.30 64-bit
Monolith 2 64-bit
Cheng 4.41 64-bit
Bagatur 2.2c 64-bit
Amoeba 3.3 64-bit
FabChess 1.16 64-bit
Godel 7.0 64-bit
Deuterium 2019.2.37.73 64-bit
Mr Bob 1.1.0 64-bit
Velvet 2.0.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 4

3.0 - Mr Bob 1.0.0 64-bit
3.0 - Rodent IV 0.30 64-bit
2.5 - Pirarucu 3.3.5 64-bit
2.5 - Topple 0.8.0 64-bit
2.5 - Amoeba 3.3 64-bit
2.5 - Monolith 2.0 64-bit
2.5 - Bagatur 2.2c 64-bit
2.0 - Counter 3.8 64-bit
1.5 - FabChess 1.16 64-bit
1.5 - Deuterium 2019.2.37.73 64-bit
1.5 - Drofa 3.1.0 64-bit
1.5 - Velvet 2.0.0 64-bit
1.0 - Cheng 4.41 64-bit
0.5 - Godel 7.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 8

5.5 - Rodent IV 0.30 64-bit
5.5 - Pirarucu 3.3.5 64-bit
5.0 - Monolith 2.0 64-bit
5.0 - Bagatur 2.2c 64-bit
4.5 - Amoeba 3.3 64-bit
4.5 - Topple 0.8.0 64-bit
4.5 - Mr Bob 1.0.0 64-bit
3.5 - FabChess 1.16 64-bit
3.5 - Deuterium 2019.2.37.73 64-bit
3.5 - Godel 7.0 64-bit
3.0 - Velvet 2.0.0 64-bit
3.0 - Cheng 4.41 64-bit
2.5 - Counter 3.8 64-bit
2.5 - Drofa 3.1.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 12

8.5 - Pirarucu 3.3.5 64-bit
7.5 - Rodent IV 0.30 64-bit
7.5 - Bagatur 2.2c 64-bit
7.0 - Amoeba 3.3 64-bit
7.0 - Monolith 2.0 64-bit
6.5 - Mr Bob 1.0.0 64-bit
6.0 - FabChess 1.16 64-bit
6.0 - Topple 0.8.0 64-bit
6.0 - Deuterium 2019.2.37.73 64-bit
5.5 - Godel 7.0 64-bit
4.5 - Velvet 2.0.0 64-bit
4.5 - Counter 3.8 64-bit
4.0 - Cheng 4.41 64-bit
3.5 - Drofa 3.1.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 16

11.0 - Pirarucu 3.3.5 64-bit
10.5 - Monolith 2.0 64-bit
10.0 - Rodent IV 0.30 64-bit
9.5 - Amoeba 3.3 64-bit
9.0 - Topple 0.8.0 64-bit
8.5 - Mr Bob 1.0.0 64-bit
8.5 - Bagatur 2.2c 64-bit
7.5 - Counter 3.8 64-bit
7.0 - Godel 7.0 64-bit
6.5 - FabChess 1.16 64-bit
6.5 - Deuterium 2019.2.37.73 64-bit
6.5 - Cheng 4.41 64-bit
6.0 - Velvet 2.0.0 64-bit
5.0 - Drofa 3.1.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 20

13.5 - Pirarucu 3.3.5 64-bit
12.0 - Topple 0.8.0 64-bit
12.0 - Monolith 2.0 64-bit
12.0 - Rodent IV 0.30 64-bit
11.0 - Mr Bob 1.0.0 64-bit
10.5 - Bagatur 2.2c 64-bit
10.5 - Amoeba 3.3 64-bit
9.5 - FabChess 1.16 64-bit
9.5 - Counter 3.8 64-bit
9.0 - Cheng 4.41 64-bit
8.5 - Godel 7.0 64-bit
8.0 - Deuterium 2019.2.37.73 64-bit
7.5 - Drofa 3.1.0 64-bit
6.5 - Velvet 2.0.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 24

15.0 - Monolith 2.0 64-bit
14.5 - Pirarucu 3.3.5 64-bit
14.0 - Topple 0.8.0 64-bit
14.0 - Rodent IV 0.30 64-bit
13.0 - Amoeba 3.3 64-bit
12.5 - FabChess 1.16 64-bit
12.5 - Mr Bob 1.0.0 64-bit
12.5 - Counter 3.8 64-bit
12.5 - Bagatur 2.2c 64-bit
10.5 - Cheng 4.41 64-bit
10.5 - Deuterium 2019.2.37.73 64-bit
10.0 - Godel 7.0 64-bit
8.5 - Drofa 3.1.0 64-bit
8.0 - Velvet 2.0.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 28

17.0 - Monolith 2.0 64-bit
17.0 - Rodent IV 0.30 64-bit
16.0 - Topple 0.8.0 64-bit
16.0 - Pirarucu 3.3.5 64-bit
15.5 - Mr Bob 1.0.0 64-bit
14.5 - FabChess 1.16 64-bit
14.5 - Bagatur 2.2c 64-bit
14.5 - Counter 3.8 64-bit
14.5 - Amoeba 3.3 64-bit
13.5 - Cheng 4.41 64-bit
12.5 - Deuterium 2019.2.37.73 64-bit
11.0 - Drofa 3.1.0 64-bit
10.5 - Godel 7.0 64-bit
9.0 - Velvet 2.0.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 32

19.5 - Rodent IV 0.30 64-bit
19.0 - Monolith 2.0 64-bit
19.0 - Pirarucu 3.3.5 64-bit
18.5 - Topple 0.8.0 64-bit
17.0 - Mr Bob 1.0.0 64-bit
16.5 - Bagatur 2.2c 64-bit
16.5 - Cheng 4.41 64-bit
16.5 - Amoeba 3.3 64-bit
16.0 - FabChess 1.16 64-bit
16.0 - Counter 3.8 64-bit
14.0 - Deuterium 2019.2.37.73 64-bit
13.0 - Godel 7.0 64-bit
12.5 - Drofa 3.1.0 64-bit
10.0 - Velvet 2.0.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com
User avatar
Graham Banks
Posts: 41415
Joined: Sun Feb 26, 2006 10:52 am
Location: Auckland, NZ

Re: Topple Of The Monolith

Post by Graham Banks »

TOPPLE OF THE MONOLITH

Intel i5 Quad
ChessGUI
256mb hash each
3-4-5 piece tablebases
Ponder off
GBSelect2021.cgb book
40 moves in 25 minutes repeating (adapted for the CCRL)
2 cycles 52 rounds
All engines 64-bit where available


Standings after Round 36

21.5 - Monolith 2.0 64-bit
21.5 - Pirarucu 3.3.5 64-bit
21.0 - Rodent IV 0.30 64-bit
19.0 - Topple 0.8.0 64-bit
19.0 - FabChess 1.16 64-bit
19.0 - Bagatur 2.2c 64-bit
19.0 - Amoeba 3.3 64-bit
18.5 - Mr Bob 1.0.0 64-bit
18.0 - Counter 3.8 64-bit
18.0 - Cheng 4.41 64-bit
17.5 - Deuterium 2019.2.37.73 64-bit
15.5 - Godel 7.0 64-bit
14.0 - Drofa 3.1.0 64-bit
10.5 - Velvet 2.0.0 64-bit


Games and standings will be available after every four rounds from the following link:
http://kirill-kryukov.com/chess/discuss ... =7&t=13192

If you install TLCV (Tom's Live Chess Viewer) on your computer, you can watch the games live move by move. You'll also be able to chat to others following the tournament in the chatroom there.
http://kirill-kryukov.com/chess/discuss ... p?id=42959
Host - GrahamCCRL.dyndns.org Port - 16002

Linux users can use Livius:
https://github.com/kmar/livius

There is also a Livius windows version.
It has live pv boards as a nice addition.
http://www.crabaware.com/livius/
gbanksnz at gmail.com