ChessGUI fails to save depth?

[Guenther]

Hi Matthias,

This is from a large PGN saved by ChessGUI 0.148. The problem is that depth, eval, time and ponder were checked for the PGN but depth is apparently missing.

[Event "CCRL blitz"]
[Site "ChessGUI"]
[Date "2009.04.13"]
[Time "15:40:16"]
[Round "1"]
[White "KnightX 1.92"]
[Black "Cheese 1.3"]
[Result "0-1"]
[TimeControl "40/155:40/155:40/155"]
[PlyCount "88"]
[Number "1"]
[WhiteType "program"]
[BlackType "program"]
[Variant "normal"]

{ Unknown Hardware }
1.c4 {[%eval 0,1] [%emt 00:00:00]} e6 {[%eval 0,1] [%emt 00:00:00]} 2.Nc3 {[%eval 0,1] [%emt 00:00:00]} d5 {[%eval 0,1] [%emt 00:00:00]}
3.d4 {[%eval 0,1] [%emt 00:00:00]} Nf6 {[%eval 0,1] [%emt 00:00:00]} 4.cxd5 {[%eval 0,1] [%emt 00:00:00]} exd5 {[%eval 0,1] [%emt 00:00:00]}
5.Bg5 {[%eval 0,1] [%emt 00:00:00]} c6 {[%eval 0,1] [%emt 00:00:00]} 6.e3 {[%eval 0,1] [%emt 00:00:00]} Be7 {[%eval 0,1] [%emt 00:00:00]}
7.Bd3 {[%eval 0,1] [%emt 00:00:00]} Nbd7 {[%eval 0,1] [%emt 00:00:00]}
8.Qc2 {[%eval 0,1] [%emt 00:00:00]} O-O {[%eval 0,1] [%emt 00:00:00]} 9.Nge2 {[%eval 0,1] [%emt 00:00:00]} Re8 {[%eval 0,1] [%emt 00:00:00]}
10.O-O {[%eval 0,1] [%emt 00:00:00]} Nf8 {[%eval 0,1] [%emt 00:00:00]}
11.Ng3 {(Bd6) [%eval 35,9] [%emt 00:00:05]} Ng4 {(Bxe7) [%eval -41,11] [%emt 00:00:05]}
12.Bxe7 {(Qxe7) [%eval 51,10] [%emt 00:00:07]} Qxe7 {(Rfe1) [%eval -42,12] [%emt 00:00:04]}
13.h3 {(Nf6) [%eval 41,10] [%emt 00:00:04]} Nf6 {(Qb3) [%eval -38,11] [%emt 00:00:05]}
14.a4 {(a5) [%eval 36,10] [%emt 00:00:05]} Ne6 {(a5) [%eval -25,11] [%emt 00:00:04]}
15.a5 {(Nc7) [%eval 51,9] [%emt 00:00:05]} Ng5 {(a6) [%eval -28,10] [%emt 00:00:05]}
16.a6 {(bxa6) [%eval 45,9] [%emt 00:00:04]} bxa6 {(Ra2) [%eval -4,10] [%emt 00:00:05]}
17.Bxa6 {(Bd7) [%eval 55,9] [%emt 00:00:07]} Qc7 {(Bxc8) [%eval -36,10] [%emt 00:00:03]}
18.b4 {(Ne6) [%eval 63,8] [%emt 00:00:04]} Bxh3 {(gxh3) [%eval 28,11] [%emt 00:00:04]}
19.gxh3 {(Rxe3) [%eval 148,10] [%emt 00:00:04]} Rxe3 {(Nce2) [%eval 25,11] [%emt 00:00:03]}
20.fxe3 {(Qxg3) [%eval 133,10] [%emt 00:00:04]} Qxg3 {(Qg2) [%eval 10,11] [%emt 00:00:03]}
21.Qg2 {(Qxe3) [%eval 101,12] [%emt 00:00:06]} Qxe3 {(Kh2) [%eval 43,12] [%emt 00:00:03]}
22.Kh2 {(Qxc3) [%eval 113,11] [%emt 00:00:06]} Qxc3 {(Qxg5) [%eval 43,11] [%emt 00:00:03]}
23.Qxg5 {(Qxd4) [%eval 129,10] [%emt 00:00:06]} Ne4 {(Qf4) [%eval 0,11] [%emt 00:00:05]}
24.Qf4 {(Rf8) [%eval 126,10] [%emt 00:00:04]} Rf8 {(Bb7) [%eval 0,12] [%emt 00:00:05]}
25.Bb7 {(Qb2) [%eval 146,10] [%emt 00:00:04]} g5 {(Qe5) [%eval 0,11] [%emt 00:00:05]}
26.Qe5 {(Qd2) [%eval 92,10] [%emt 00:00:06]} Qd2 {(Kg1) [%eval 0,12] [%emt 00:00:05]}
27.Kh1 {(Qe3) [%eval 126,11] [%emt 00:00:06]} Qc3 {(Kh2) [%eval 0,13] [%emt 00:00:05]}
28.h4 {(Qh3) [%eval 0,11] [%emt 00:00:06]} Qh3 {(Qh2) [%eval 58,11] [%emt 00:00:05]}
29.Qh2 {(Ng3) [%eval 0,12] [%emt 00:00:03]} Ng3 {(Kg1) [%eval 33,12] [%emt 00:00:04]}
30.Kg1 {[%eval 0,0] [%emt 00:00:00]} Qg4 {(Rf2) [%eval 33,11] [%emt 00:00:05]}
31.hxg5 {(Ne2) [%eval 0,11] [%emt 00:00:04]} Nxf1 {(Kxf1) [%eval 88,11] [%emt 00:00:03]}
32.Kxf1 {(Qf3) [%eval 0,12] [%emt 00:00:04]} Qxd4 {(Rc1) [%eval 141,11] [%emt 00:00:06]}
33.Rc1 {(Qe3) [%eval 0,10] [%emt 00:00:06]} Re8 {(Qf2) [%eval 173,11] [%emt 00:00:04]}
34.Qf2 {(Qd3) [%eval -370,11] [%emt 00:00:05]} Qd3 {(Kg1) [%eval 452,13] [%emt 00:00:06]}
35.Kg1 {(Re2) [%eval -375,12] [%emt 00:00:05]} Re2 {(Ba6) [%eval 459,13] [%emt 00:00:06]}
36.Ba6 {(Qxa6) [%eval -401,11] [%emt 00:00:03]} Qxa6 {(Qf6) [%eval 476,13] [%emt 00:00:06]}
37.Qf6 {(Qc8) [%eval -370,10] [%emt 00:00:04]} Qb6 {(Kf1) [%eval 476,11] [%emt 00:00:06]}
38.Kf1 {[%eval -401,10] [%emt 00:00:04]} Re4 {(Rc2) [%eval 523,12] [%emt 00:00:06]}
39.Rxc6 {(Qb5) [%eval -721,9] [%emt 00:00:03]} Qb5 {(Kg1) [%eval 842,13] [%emt 00:00:03]}
40.Kg1 {(Re1) [%eval -821,10] [%emt 00:00:02]} Re1 {(Kg2) [%eval 847,13] [%emt 00:00:04]}
41.Kg2 {(Qe2) [%eval -886,12] [%emt 00:00:07]} Qe2 {(Qf2) [%eval 1038,13] [%emt 00:00:04]}
42.Qf2 {(Qg4) [%eval -886,12] [%emt 00:00:05]} Qg4 {(Kh2) [%eval 1042,12] [%emt 00:00:04]}
43.Kh2 {(Re2) [%eval -1004,12] [%emt 00:00:05]} Re2 {(Rf6) [%eval 1088,13] [%emt 00:00:03]}
44.Rf6 {(Rxf2) [%eval -1138,11] [%emt 00:00:04]} Rxf2 {(Rxf2) [%eval 1200,13] [%emt 00:00:03]}
0-1
{ Game Nr. 1 : KnightX 1.92 resigns against Cheese 1.3
GameDuration = 00:05:52, Finalposition 6k1/p4p1p/5R2/3p2P1/1P4q1/8/5r1K/8 w - - 0 45 }

Hi Gabor

I don't see the depth missing. It is after the separating comma of
the eval, e.g [%eval 51,10] => +0.51 depth 10.

Guenther

[Graham Banks]

Actually there is an unrelated thing that Matthias should be aware of.
If I add/remove an engine into a running tournament, the schedule file will give the games played to date in the first cycle the same results for subsequent cycles. This means I have to edit the schedule file by hand because the replay games option only gives one pairing for each clash rather than listing every single game.

[Matthias Gemuh]

Actually there is an unrelated thing that Matthias should be aware of.
If I add/remove an engine into a running tournament, the schedule file will give the games played to date in the first cycle the same results for subsequent cycles. This means I have to edit the schedule file by hand because the replay games option only gives one pairing for each clash rather than listing every single game.

Obviously I did not intend to have it function that way
I shall look into it.

Matthias.

[Graham Banks]

Actually there is an unrelated thing that Matthias should be aware of.
If I add/remove an engine into a running tournament, the schedule file will give the games played to date in the first cycle the same results for subsequent cycles. This means I have to edit the schedule file by hand because the replay games option only gives one pairing for each clash rather than listing every single game.

Obviously I did not intend to have it function that way
I shall look into it.

Matthias.

Matthias - you're doing a fantastic job with ChessGUI and it is greatly appreciated. Don't get disheartened that there are still things to do. You're getting there!

[Matthias Gemuh]

Actually there is an unrelated thing that Matthias should be aware of.
If I add/remove an engine into a running tournament, the schedule file will give the games played to date in the first cycle the same results for subsequent cycles. This means I have to edit the schedule file by hand because the replay games option only gives one pairing for each clash rather than listing every single game.

Hi Graham,

in a first attempt, I have failed to reproduce what you say here.
Only problem I found was that if you replace engines in an already finished tournament, resuming the tournament will not work.
I shall investigate more later.

Matthias.

[Graham Banks]

Actually there is an unrelated thing that Matthias should be aware of.
If I add/remove an engine into a running tournament, the schedule file will give the games played to date in the first cycle the same results for subsequent cycles. This means I have to edit the schedule file by hand because the replay games option only gives one pairing for each clash rather than listing every single game.

Hi Graham,

in a first attempt, I have failed to reproduce what you say here.
Only problem I found was that if you replace engines in an already finished tournament, resuming the tournament will not work.
I shall investigate more later.

Matthias.

Just in case what I'm doing is wrong. I click on add/remove engines, then I move one engine out to the left and move one in from the right. After okaying this, I click on resume tournament. This in in a 4 cycle round robin with type 2 pairings and alternate colours.

Cheers, Graham.

[Matthias Gemuh]

Just in case what I'm doing is wrong. I click on add/remove engines, then I move one engine out to the left and move one in from the right. After okaying this, I click on resume tournament. This in in a 4 cycle round robin with type 2 pairings and alternate colours.

Cheers, Graham.

I the same thing here, though with type 1 pairings.
I shall look again later.

Best,
Matthias.

[Matthias Gemuh]

Just in case what I'm doing is wrong. I click on add/remove engines, then I move one engine out to the left and move one in from the right. After okaying this, I click on resume tournament. This in in a 4 cycle round robin with type 2 pairings and alternate colours.

Cheers, Graham.

I the same thing here, though with type 1 pairings.
I shall look again later.

Best,
Matthias.

I see it now.
Pgn is OK but old entries in schedule file are wrong.
Shall be fixed in next version.

Matthias.

[Graham Banks]

Just in case what I'm doing is wrong. I click on add/remove engines, then I move one engine out to the left and move one in from the right. After okaying this, I click on resume tournament. This in in a 4 cycle round robin with type 2 pairings and alternate colours.

Cheers, Graham.

I the same thing here, though with type 1 pairings.
I shall look again later.

Best,
Matthias.

I see it now.
Pgn is OK but old entries in schedule file are wrong.
Shall be fixed in next version.

Matthias.

You're a champion.