For example imagine that you want to use a time control of 30 minutes and 5 seconds.
With Mephisto Amsterdam:
Code: Select all
StartChildProcess (dir="..\") messtiny amsterd -mmlog -nommunlimited
625 >first : xboard
protover 2
625 <first : Mess Mephisto Version: 0.138.d Winboard (Jul 5 2010)
641 <first :
641 <first : Mephisto Amsterdam
641 <first :
641 <first : Emulator org. clock : 12000000
641 <first : Emulator curr.clock : 12000000
641 <first : Speed factor clock : 1.00
641 <first :
641 <first : OS ticks_per_second : 3237189
641 <first :
641 <first : Supported Levels:
641 <first :
641 <first : Level 0: 3 seconds/move -> st 3
641 <first : Level 1: 5 seconds/move -> st 5
641 <first : Level 2: 10 seconds/move -> st 10
641 <first : Level 3: 20 seconds/move -> st 20
641 <first : Level 4: 60 seconds/move -> st 60
641 <first : Level 5: 120 seconds/move -> st 120
641 <first : Level 6: 40 move in 2 hours -> level 40 120 0
641 <first :
641 <first : PLAy
1094 <first : feature sigint=0 ping=1 setboard=1 color=0 done=1 myname="Mephisto Amsterdam"
1094 >first : accepted sigint
1094 >first : accepted ping
1094 >first : accepted setboard
1094 >first : rejected color
1094 >first : accepted done
1094 >first : accepted myname
1110 >first : new
random
1110 >first : level 0 30 5
1110 >first : post
1110 >first : hard
1110 >first : easy
1110 >first : ping 1
1344 <first : Time control not supported - default level used !!!
1344 <first : Supported Levels:
1344 <first :
1344 <first : Level 0: 3 seconds/move -> st 3
1344 <first : Level 1: 5 seconds/move -> st 5
1360 <first : Level 2: 10 seconds/move -> st 10
1360 <first : Level 3: 20 seconds/move -> st 20
1360 <first : Level 4: 60 seconds/move -> st 60
1375 <first : Level 5: 120 seconds/move -> st 120
1375 <first : Level 6: 40 move in 2 hours -> level 40 120 0
1375 <first :
Now with Mephisto Roma32:
Code: Select all
StartChildProcess (dir="..\") messtiny roma32 -mmlog -nommunlimited
594 >first : xboard
protover 2
594 <first : Mess Mephisto Version: 0.138.d Winboard (Jul 5 2010)
609 <first :
609 <first : Mephisto Roma 32 Bit
609 <first :
609 <first : Emulator org. clock : 14000000
609 <first : Emulator curr.clock : 14000000
609 <first : Speed factor clock : 1.00
609 <first :
609 <first : OS ticks_per_second : 3237189
609 <first :
609 <first : Supported Levels:
609 <first :
609 <first : Level 0: 3 seconds/move -> st 3
609 <first : Level 1: 5 seconds/move -> st 5
609 <first : Level 2: 10 seconds/move -> st 10
609 <first : Level 3: 20 seconds/move -> st 20
609 <first : Level 4: 60 seconds/move -> st 60
609 <first : Level 5: 120 seconds/move -> st 120
609 <first : Level 6: 40 move in 2 hours -> level 40 120 0
609 <first :
609 <first : PLAy
1015 <first : feature sigint=0 ping=1 setboard=1 color=0 done=1 myname="Mephisto Roma 32 Bit"
1015 >first : accepted sigint
1015 >first : accepted ping
1015 >first : accepted setboard
1015 >first : rejected color
1015 >first : accepted done
1015 >first : accepted myname
1031 >first : new
random
1031 >first : level 0 30 5
1031 >first : post
1031 >first : hard
1031 >first : easy
1031 >first : ping 1
1515 <first : LE02
1562 <first : LE 3
1609 <first : LE37
1640 <first : PLAy
1703 <first : LE37
1750 <first : A1--
1797 <first : A1
1844 <first : PLAy
But it is possible that I used Mephisto Roma32 for the tests for this reason and not Mephisto Amsterdam, I do not remember it well.
(I know that if you use the option full strength (without -nommunlimited) then Mephisto uses level 99 (analysis) and the time of control is performed by Messtiny rather than by the Mephisto).
On the other hand I found this:
Mephisto Roma 68020 - 14 Mhz
*BLITZ 5´= 2130 ELO ( ELO MACHINE ) - for Human + 80 Elo= +2200 Elo
*BLITZ 30´= 2085 ELO ( ELO MACHINE ) - for Human + 80 Elo= +2150 Elo
*LEVEL 1H = 2070 ELO ( ELO MACHINE ) - for Human + 80 ELO= +2125 ELO
*LEVEL 2H= 2030 ELO ( ELO MACHINE ) - for Human + 80 ELO= +2100 ELO